Live Chat Software
Support Center > Knowledge base> Category: WM-FAM Series
Category: WM-FAM Series
7 Articles
Orange arrow Can the WM-PC Series meter be installed vertically?

3100 views
  No. This meter is required to be installed horizontally with the face up. Here are some other meters that you might want to consider for vertical applications: WM Series WM-FAM-075-G-F (3/4" Only)...
Orange arrow How do I get my flow rate if I do not have a flow meter, so I know what size meter to purchase?

5664 views
  This is a great question. The flow rate is much more important for meter sizing than the line size in which the meter will be installed. The quickest way to do this is what we call a bucket test. You get a bucket that has a known volume or you measure out a known volume into a bucket and mark a ...
Orange arrow What is the difference between a 5/8 and a ¾ meter?

13320 views
  Water meters have drastically improved through the years. Prior to some of these changes, the industry referred to a meter that could process flow rates of 1-20 GPM with a 13 psig pressure drop as a 5/8 meter. Therefore a meter that can handle 1-20 GPM with a ¾” NPT connection was refe...
Tagged: Meter Sizing


Orange arrow I do not have the room to install a water meter horizontally do you have any other options?

9342 views
  Yes, we have several options for you that can be mounted vertically. Visit our Vertical Installation page to see a list of products that can be installed vertically: https://www.flows.com/vertical/...
Orange arrow Which water meters do you sell that are specifically approved by the state of Massachusetts?

2805 views
  UPDATE: AS OF DECEMBER 2019 THE WM-PC AND WM-NLC SERIES METERS ARE LISTED ON THE MASSACHUSETTS APPROVED PLUMBING LIST. After reviewing the list provided through the Office of Consumer Affairs and Business Regulation for the State of Massachusetts (link provided below), Flows.Com stocks several dif...
Orange arrow Why is it recommended to install some residential water meters horizontally.

9076 views
  For Multi-jet dry type meter: The measuring impeller and register are magnetically coupled not directly connected, it is designed to be installed horizontally to insure the actual meter accuracy stays within the published accuracy curves. If the meter is installed vertically the distance between t...
Orange arrow I live in Enfield, CT and I need to install a deduct water meter to get a credit on my sewer bill. What do you recommend?

4988 views
  We have had many questions from Enfield Connecticut about our water meters. Your township does allow you to purchase a meter in gallons or cubic feet but we are hearing from a lot of Enfield Residents it is easier to go with the cubic feet water meter. We have looked at Enfield's online form for me...

Page: 1 of 1